These side plates differ from the standard side plate only by having a 1" lip that wraps under the tub of your Jeep and are otherwise identical.

Note: This sideplates are also available without a front cutout by placing an X after the U in the part number (i.e. 905UX). This replaces the cutout front with a flat squared end. You will need to trim this to fit the front in whatever configuration you're using. If you are removing your flare extension, going to an aftermarket flare with no extension, or are doing a custom front of some sort, the X series is the sideplate you will need to use. Sahara and Renegade are only compatible with plastic pieces removed and X version sideplate.

Add PC to the end of the part number for black powdercoat finish (i.e. 905U with powdercoating is 905UPC). Installation is a drill and pop rivet application.