Note: Warrior Sideplates will not fit Wrangler Jeeps with the plastic option Renegade/Sahara trim packages, unless those plastic pieces are removed. You will need to use the X version with those models

Note: This sideplates are also available without a front cutout by placing an X after the part number (i.e. 905X). This replaces the cutout front with a flat squared end. You will need to trim this to fit the front in whatever configuration you're using. If you are removing your flare extension, going to an aftermarket flare with no extension, or are doing a custom front of some sort, the X series is the sideplate you will need to use.

Also available in 12 gauge steel with black powdercoated finish. Part numbers for steel side plates are the same as aluminum only prefixed with an 'S' at the beginning (i.e. 905 sideplate in steel is S905). You can also have the aluminum diamond plate powdercoated black. Those part numbers are suffixed with a PC (i.e. 905 sideplate with powdercoating is 905PC).

The X versions of the sideplates (i.e 905X) do not have the front notch for the factory fender flares. Trim to fit.