REAR CORNERS

Rear corners have a material thickness of 1/8" and not only provide structural support to the corner area, but enhance the appearance of the vehicle too. To allow easier installation, corners have precut holes for the gas tank and tail light openings, unless otherwise specified. Sold in pairs.

If you would like to see an ENLARGED PHOTO of a product, click on the camera icon next to the part number below. Please note that some products do not have photos available.

Model	Year	Description	Finish/Part Number				Instruction Sheet
			Diamond Plate	Black Powder-Coat	Polished Aluminum	12-gauge Steel
Rear Corners
CJ2A & 3A	45 - ‘55	Corners Without Holes	903	903PC	903PA ¹	S903
CJ2A & 3A	45 - ‘55	Corners With No Fender Cut Out	903WO	903WOPC	903WOPA ¹	S903WO
CJ5 & M38	51 - ‘75	Corners Without Holes	902	902PC	902APA ¹	S902
CJ5 & M38	51 - ‘75	Full Wrap Around	902FW	902FWPC	-	S902FW
CJ7	76 - ‘86	Corners Without Holes	904	904PC	904PA ¹	S904
CJ7	76 - ‘86	Corners With Holes	904A	904APC	904APA ¹	S904A
CJ8	81 - ‘86	Corners Without Holes	910	910PC	910PA ¹	S910
YJ Wrangler	87 - ‘96	Corners Without Holes	907	907PC	907PA ¹	S907
YJ Wrangler	87 - ‘96	Corners With Holes	907A	907APC	907APA ¹	S907A
TJ Wrangler & Rubicon	97 - ‘06	Corners Without Holes	916	916PC	916PA ¹	S916
TJ Wrangler & Rubicon	97 - ‘06	Corners With Holes	916A	916APC	916APA ¹	S916A
TJ Wrangler & Rubicon	97 - ‘06	Corners For Bushwacker Flares W/Holes	916AX	916AXPC	916AXPA ¹	S916AX
LJ Unlimited	03 - ‘06	Corners Without Holes	918	918PC	918PA ¹	S918
LJ Unlimited	03 - ‘06	Corners With Holes	918A	918APC	918APA ¹	S918A
LJ Unlimited	03 - ‘06	Corners For Bushwacker Flares W/Holes	918AX	918AXPC	918AXPA ¹	S918AX
JK Wrangler & Unlimited	07 - 09	Corners With Holes	920A	920APC	920APA ¹	S920A
JK Wrangler (2dr)	07 - 09	Corners Without Holes	924	924PC	924PA ¹	S924
JK Unlimited (4dr)	07 - 09	Corners Without Holes	926	926PC	926PA ¹	S926

Notes:
¹ All polished aluminum (PA series part #'s) are considered special order. This means that they are not an inventory part number, and will be subject to an estimated 4 week waiting period. Special orders cannot be cancelled or returned. Special order items will still carry the standard Warrior Products warranty.

Warrior Products offers the broadest selection of base materials and surface finishes in its line of Body Armor Exterior Protection accessories available on the market today.  In addition to its signature aluminum diamond plate material, we offerthese products in the following four finishes:
Diamond Plate	Black Powder-Coat	Polished Aluminum	12-gauge Steel