Rear Corners
Fits Vehicle: 1997 – 2006 Jeep TJ WranglerRear corners have a material thickness of 1/8″ and not only provide structural support to the corner area, but enhance the appearance of the vehicle too. To allow easier installation, corners have precut holes for the gas tank and tail light openings, unless otherwise specified. Sold in pairs. |
||
|
NOTE: Photos above are for illustration purposes ONLY. Product in photo may not be the right part for you. Please view the chart below to find the correct part. |
||
Part Numbers
| Model | Year | Description | Finish/Part Number | ||||
| Diamond Plate | Black Diamond Plate | Polished Aluminum | 12-gauge Steel | ||||
| Rear Corners | |||||||
| TJ | 97 – 06 | No Holes | 916 | 916PC | 916PA | S916 | |
| TJ | 97 – 06 | With Holes | 916A | 916APC | 916APA | S916A | |
| TJ | 97 – 06 | Corners For Bushwacker Flares W/Holes | 916AX | 916AXPC | 916AXPA | S916AX | |
| NOTE: All Polished Aluminum parts are considered a special order. This means that they are not an inventoried part number and will be subject to an estimated 4 week waiting period. Special orders cannot be cancelled or returned. Special order items will still carry the standard Warrior Products warranty. | |||||||
Instructions
Notes: Do not come pre-drilled; May contain 1 or 2 pre-drilled holes for powder-coat purposes
Tools required: Drill, Pop-Rivet Gun
Available Finishes
Note: All polished aluminum (PA series part #’s) are considered special order. This means that they are not an inventory part number, and will be subject to an estimated 4 week waiting period. Special orders cannot be cancelled or returned. Special order items will still carry the standard Warrior Products warranty.
Purchase this Product
![]() Find a |
![]() Submit a |
![]() Become a |















