Rear Corners
Fits Vehicle: 2007 – 2012 Jeep JK WranglerRear corners have a material thickness of 1/8″ and not only provide structural support to the corner area, but enhance the appearance of the vehicle too. To allow easier installation, corners have precut holes for the gas tank and tail light openings, unless otherwise specified. Sold in pairs. |
||
 Click photo to enlarge. |
 Click photo to enlarge. |
 Click photo to enlarge. |
|
NOTE: Photos above are for illustration purposes ONLY. Product in photo may not be the right part for you. Please view the chart below to find the correct part. |
||
Part Numbers
| Model | Year | Description | Finish/Part Number | |||
| Diamond Plate | Black Diamond Plate | Polished Aluminum | 12-gauge Steel | |||
| Rear Corners | ||||||
| JK | 07 – 12 | With Holes | 920A | 920APC | 920APA | S920A |
| JK – 2 Door | 07 – 12 | Without Holes | 924 | 924PC | 924PA | S924 |
| JK – 4 Door | 07 – 12 | Without Holes | 926 | 926PC | 926PA | S926 |
| Please note: Corners without holes do not match fatory JK body curve. Corners will have curve similar to the LED version. | ||||||
Instructions
Download Instructions Here
Notes: Do not come pre-drilled; May contain 1 or 2 pre-drilled holes for powder-coat purposes
Tools required: Drill, Pop-Rivet Gun
Available Finishes
 Polished Diamond Plate |
 Black Diamond |
|||
 Smooth Black |
 Smooth Polished Aluminum |
|||
| NOTES: All polished aluminum (PA series part #’s) are considered special order. This means that they are not an inventory part number, and will be subject to an estimated 4 week waiting period. Special orders cannot be cancelled or returned. Special order items will still carry the standard Warrior Products warranty. |
||||
Purchase this Product
 Purchase Warrior Online |
 Find a |
 Submit a |
 Become a |
