Rear Corners
Fits Vehicle: 1953 – 1983 Jeep CJ5
|
P/N 903 shown. See chart below for your part.
|
P/N 902PC shown. See chart below for your part.
|
P/N S902FW shown. See chart below for your part.
|
|
-
Rear corners have a material thickness of 1/8″ and not only provide structural support to the corner area, but enhance the appearance of the vehicle too.
- To allow easier installation, corners have pre-cut holes for the gas tank and tail light openings, unless otherwise specified.
- Available in Aluminum Diamond Plate, Aluminum Black Diamond Plate, Polished Aluminum, and Smooth Black 12 Gauge Steel.
- Sold in pairs.
|
Available Finishes
Aluminum Diamond Plate
|
Aluminum Black
Diamond Plate
|
Smooth Black
Steel
|
Smooth Polished Aluminum
|
|
Part Numbers
| Model |
Year |
Description |
Finish/Part Number |
| Aluminum Diamond Plate |
Aluminum Black Diamond Plate |
Polished Aluminum |
12-gauge Steel |
| Rear Corners |
| CJ2A & 3A |
45 – 55 |
No Holes |
903 |
903PC |
903PA |
S903 |
| CJ2A & 3A |
45 – 55 |
No Holes or Fender Cut Out |
903WO |
903WOPC |
903WOPA |
S903WO |
| CJ5 & M38 |
51 – 75 |
No Holes |
902 |
902PC |
902PA |
S902 |
| CJ5 & M38 |
55 – 75 |
Full Wrap Around |
902FW |
902FWPC |
- |
S902FW |
NOTE: All Polished Aluminum (PA Series part #s) are considered a special order. This means that they are not an inventoried part number and will be subject to an estimated 4 week waiting period. Special orders cannot be cancelled or returned. Special order items will still carry the standard Warrior Products warranty.
|
|
Purchase this Product
Buy
Online
|
Find a
Local Dealer
|
Submit
P/O
|
Become a
Dealer
|
|
Instructions
Download Instructions
Here
|
Download Full Wrap Instructions Here
|
Notes: Do not come pre-drilled; May contain 1 or 2 pre-drilled holes for powder-coat purposes
Tools required: Drill, Pop-Rivet Gun
|
If you’re an authorized dealer, you can submit a purchase order here.
If you’d like to find a dealer in your neck of the woods, fill out the form below with your location and we’ll get back to you.
