Front Bumper
Fits Vehicle: 2007 – 2014 Toyota FJ Cruiser
|
P/N 3530 shown. See chart below for your part.
|
P/N 3515 shown. See chart below for your part.
|
|
P/N 3520 shown. See chart below for your part.
|
-
The Warrior Products Toyota FJ Cruiser Front Bumper provides rugged construction and a rounded underside for a greater approach and departure angle.
- The Brush Guard included in Part # 3530 is formed from 1 1/2” round steel tubing and can accommodate an optional light bracket (#59003).
- Models come with or without built-in Winch Mounts, D-ring Mounts, and/or Brush Guard.
- Bumpers are constructed of high quality steel and black powder-coated for lasting durability.
- When installing the Warrior Front Winch Bumper for the FJ Cruiser, a small area of the vehicle is left exposed under the bumper.
-
The Warrior FJ Front Bumper Skid Plate complements the design of the front bumper and features an easy bolt-on installation. This Skid Plate is built from 1/8” steel and powder-coated for durability. Compatible with ALL Warrior Products FJ Cruiser Front Bumpers.
-
The FJ Cruiser Front Bumper will fit most popular winches in the 8000-10,000 lbs range that have removable solenoid packs.
- For the 2014 FJ Cruiser, some modifications to the headlight brackets need to be made.
-
PLEASE NOTE: D-Ring Shackles Sold Separately. Winch is not included.
|
Part Numbers
Model |
Year |
Description |
Part Number |
Front Bumper |
FJ Cruiser |
07 – 14 |
Bumper Only |
3500 |
FJ Cruiser |
07 – 14 |
Bumper w/ Brush Guard |
3510 |
FJ Cruiser |
07 – 14 |
Winch Bumper w/ D-Ring Mounts |
3520 |
FJ Cruiser |
07 – 14 |
Winch Bumper w/ D-Ring Mounts & Brush Guard |
3530 |
FJ Cruiser |
07 – 09 |
Front Bumper Skid Plate |
3515 |
FJ Cruiser |
10 – 14 |
Front Bumper Skid Plate |
3516 |
|
Note: D-Ring Shackles Sold Separately. |
|
Compatible Winches
Below is a list of winches that we are fairly confident SHOULD fit the FJ Cruiser Front Winch Bumpers. With that being said, we have not actually test fit anything except for the Smittybilt XRC 8 and XRC 8 Comp Series winches listed below. Most any 8,000 to 10,000 pound rated winch will work as long as it has a non-integrated solenoid unit and the solenoid unit can be relocated.
|
Mile Marker
- SEC8 (ES)
- SEC8 Scout (ES)
- SEC8
- SEC8 Scout
- SEC9.5 (ES)
- SEC9.5
|
|
COMEUP
- DV-9s
- DV-9
- Cap 9.0s
- DV-12
- DV-12 Light
- DV-12s Light
T-Max
- TMAEW8500
- TMAEW9000
- TMAEW9000PR
- TMAEW9500
- TMAEW10000
- TMAEW10000PR
|
Smittybilt
- X20 8
- X20 8 Comp Series
- X20 10
- X20 10 Comp Series
- XRC 8
- XRC 8 Comp Series
- XRC 9.5 Gen 2
- XRC 10
- XRC 10 Comp Series
|
Warn
- VR10000-S
- VR10000
- VR8000-S
- VR8000
- 9.5XP-S
- 9.5XP
- 9.0RC
- XD9000
- M8000-S
- M8000
|
Superwinch
- Talon 9.5
- Talon 9.5SR
- Rock 9.8
- Rock 12.8
- Tiger Shark 9500
- EP9.0
- X9
- LP8500
|
Engo
|
|
- Model EPF10000
- Model EPF10000S
|
Purchase this Product
Buy Online
|
Find a Local Dealer
|
Submit P/O
|
Become a Dealer
|
|
Instructions
Download Bumper Instructions Here
|
Download Skid Plate #3515 Instructions Here
|
Download Skid Plate #3516 Instructions Here
|
|
hi i want to buy a fj cruiser bumper N# WAR3530, but i live in canada, do you know where can i found it, or a dealer near montreal, qc. thx
I have purchased your front bumper with guard for my 2014 fj, however the install is now a bit more complex. The 2014 has two brackets on either side below the headlights that must be removed or the bumper will not go on. Normally not an issue, but these brackets hold the headlights in place. Anything further?
Hi Joe,
Are you unable to install the brackets back on after you install the bumper?
Hi. I have a warrior front bumper for the FJ Cruiser… I love it. I now want to add a winch, but there doesn’t seem to be a lot of room in there. Do you have a list anywhere of winches that have successfully been installed in your bumper, preferably without any modification.
Thanks for any help
Hi Peter,
Yes, we have a list of winches that SHOULD fit. We have only tested two winches on the FJ Cruiser Front Bumper thus far (Smittybilt XRC 8 and XRC 8 Comp Series) and neither of these required modification. Most any 8,000 – 10,000 pound rated winch will work as long as it has a non-integrated solenoid unit and the solenoid unit can be relocated. The entire list has been sent to you via email for further information regarding your request.
Does installation of the bumper have any impact on air bag functionality?
Installation of the Warrior Products FJ Cruiser Front Bumper does not require removal, modification or deactivation of the OEM airbag system in any way. The airbag system is activated by sensors that measure acceleration and deceleration. Because these systems have little to do with a physical impact and more so the change in speed, the bumper should not have any major influence on when the airbags might be deployed. That being said, we have not undertaken any kind of destructive testing to force an airbag deployment in a simulated collision scenario.
I hope this helps. Please email us at customerservice@warriorproducts.com if you have any questions. Have a great weekend.
The Warrior Products FJ Cruiser Bumper Model #3530 does it come with the winch line rollers as shown in pictures? Also does the fender liners have to be removed? If so do you have to get parts to recover where fender liner was? I am seriously considering buying this bumper for my 2008 FJ Cruiser.
Also what winch do you recommend and do you have install instructions for it?
Thank You
Yes, we have install instructions for the bumper located at the bottom of this page. We can definitely send you a list of recommended winches for use with this bumper. The bumper itself does not come with winch line rollers, but each of the recommended winches will have these included. You won’t have to remove the fender liners, but you will have to trim them – the instructions should provide more details on this.
Really like your bumper!
I currently have an FJ, but am considering trading for a 4 Runner.
Will you be making this bumper for the Runner?
Maybe. While we can’t comment on our future development of products, we are able to say that we are always looking for exciting, new, and innovative ideas from the public. These suggestions and requests guide our new parts development. Thank you for your interest in Warrior Products!
Can you provide the weight of each of your bumpers for the FJ Cruiser? Specifically bumper 3530? Thanks!
Absolutely! The weights for each bumper are as follows:
#3500 – 52 lbs.
#3510 – 61 lbs.
#3520 – 82 lbs.
#3530 – 91 lbs.
Hi really like the 3530 Winch bumper. Was curious if the low hanging washer bottle will show with this bumper? Or will I be required to relocate it, like many other bumpers? Thanks.
Warrior asks that, after you install the bumper, you reinstall the factory washer bottle to the factory position. In the factory position it will be slightly visible. The other option is to use one of the many aftermarket solutions for relocating your washer bottle. We leave it up to the consumer on how/where they want to mount it. Warrior has had some consumers that simply paint the washer bottle black and hide it inside the bumper. In this case, it is barely visible.